Description

A handy sized individual remote control, which comes with a wall bracket for convenient siting.  Allows control of single or multiple windows, individually or at the same time

 

Details

Available in Silver or White

Single or Multi Channel options

Requires a Silent Gliss 9060 Motor and Radio Module

 

Silent Gliss 10300 Setup Guide
Silent Gliss 10302 Setup Guide
Silent Gliss 10303 Setup Guide
Silent Gliss 10804 Setup Guide

Description

The new high-performance motor from Silent Gliss offers fast curtain movement and remarkable power to meet the most challenging architectural needs.

 

Details

Available options:

Silent Gliss 9060 motor.
Carries curtains up to 65kg (143 lbs).
straight poles maximum length 15 Metres (49ft) – supplied in sections – maximum section per length 3.0m (10ft).
suitable for use bend bays.
quiet motors, noise level at 300mm (1’) <36dBA.
DC & AC hidden motor options.
touch and go manual operation.
motor allows manaul operation during power failure.
standard and Wave® gliders and rollers.
remote control through modular radio receiver and 9940 remote control.
control through silent gliss® – move server & app.
compatible with Home Automation systems.

 

Description

Extremely strong steel brackets, which accommodate a full range of possible double configurations.
The double side bracket provides structural support with it’s vertical backplate and secures both the polecover and track with a clever combination of locking devices. Intermediate support clamps are also provided to keep the polecover and track parallel.

 

Details

Available diameters:
Front – 38mm (1 1/2”)  Back – 38mm (1 1/2″)
Front – 38mm (1 1/2”) Back – Uncovered track
Front – 50mm (2”)  Back – 50mm (2”).
Front – 50mm (2”)  Back – 38mm (1 1/2”)
Front – 50mm (2”)  Back – Uncovered track

Projection to front track centre: 160mm (6 5/16″).
Projection to back track centre: 60mm (2 3/8″).

 

Description

The ultra low profile design of these brackets maintains a sleek linear aesthetic. Flush Ceiling brackets form a useful alternative to face fixed brackets, where fixing areas are restricted or the pole is to be fixed as close to the ceiling as possible. This bracket is designed with the backplate orientated in line with the pole, for a sleek appearance. Back plates have multiple, slotted fixing points to simplify installation and clever magnetic cover plates give the design a pleasing and clean finish.

The bracket grips both ends of the pole and also joins the track via suspended swivel clamps.

 

Details

Available diameters: 38mm (1 1/2″), 50mm (2”)
Drop to top of pole: 3mm (1/8″).

 

 

Description

The ultra low profile design of these brackets maintains a sleek linear aesthetic. Flush Ceiling brackets form a useful alternative to face fixed brackets, where fixing areas are restricted or the pole is to be fixed as close to the ceiling as possible. This bracket is designed with the backplate orientated in line with the pole, for a sleek appearance. Back plates have multiple, slotted fixing points to simplify installation and clever magnetic cover plates give the design a pleasing and clean finish.

The bracket has been carefully prepared by hand for the finishing process, before being coated and cured using different techniques depending on the selected finish.

 

Details

Available diameters: 38mm (1 1/2″), 50mm (2”)
Drop to top of pole: 3mm (1/8″).

 

Description

These heavy duty brackets are manufactured in steel and the back plates have multiple, slotted fixing points to simplify installation. A clever, sleek magnetic cover plate gives the design a pleasing and clean finish. The bracket grips both ends of the coverpole and also joins the track via swivel clamps.

 

Details

Available diameters: 38mm (1 1/2″), 50mm (2”)

 

 

Description

These heavy duty brackets are manufactured in steel and the back plates have multiple, slotted fixing points to simplify installation. A clever, sleek magnetic cover plate gives the design a pleasing and clean finish. The bracket grips the coverpole and secures to the top of the track via set screws and swivel clamps.

 

Details

Available diameters: 38mm (1 1/2″), 50mm (2”)

 

 

Description

These heavy duty brackets are manufactured in steel and the back plates have multiple, slotted fixing points to simplify installation. A clever, sleek magnetic cover plate gives the design a pleasing and clean finish. The bracket grips the coverpole and secures to the top of the track via set screws and swivel clamps.

 

Details

Available diameters: 38mm (1 1/2″), 50mm (2”)

 

 

Description

The button stud fuses together two familiar design motifs of ball and stud, to create something new and valuable. Crafted in mild steel this finial emphasises the natural beauty of this authentic material.

The piece is polished and prepared by hand, to achieve exactly the right degree of natural lustre in the steel prior to the application of the specialist coating. The coating provides both beauty and durability in this honestly crafted piece, which is designed to last a lifetime.

For further inspiration search Instagram for #bradleyfinial

 

Details

Available diameters: 38mm (1 1/2″), 50mm (2”)

 

Description

A pure and classic design. Crafted in mild steel, the classic stud is perfectly proportioned and perfectly understated.

The piece is polished and prepared by hand, to achieve exactly the right degree of natural lustre in the steel prior to the application of the specialist coating. The coating provides both beauty and durability in this timeless classic, which is designed to last a lifetime.

 

Details

Available diameters: 38mm (1 1/2″), 50mm (2”)

 

Description

Modernist, streamlined and slender, this design maintains a minimalist intent but allows for just a hint of decoration. Turned in steel, the finial has been carefully prepared by hand for the finishing process, before being coated and cured using different techniques depending on the selected finish.

For further inspiration search Instagram for #bradleyfinial

 

Details

Available diameters: 38mm (1 1/2″), 50mm (2”)

 

 

Description

The classic ball shape brought up to date in this design, with the sharp linear forms resulting from the machining process counterpointing the smooth curves of the ball.

The finial is engineered in authentic stainless steel and is carefully finished by hand.

For further inspiration search Instagram for #bradleyfinial

 

Details

Available diameters: 38mm (1 1/2″), 50mm (2”)